|
|
|
|
Replacement FasTrac ratchet suspension for the MSA-4R and the MSA-4FR. OSHA approved. OSHA regulations suggest replacing the suspension every year (Hats every 5 years or sooner if damaged) If companies don't replace the suspensions every year, they could have significant legal liability.
MSA-4FTT
The OSHA-approved Bullard B-34R is a Large hard hat fitting head sizes up to 8 3/4. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-34R is a Type 1 hard hat with adjustable 6-point ratchet suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C-34R C-34 R C34R C34 R
B-34R Hard Hat
MSA V-Gard® Hard Hats with FasTrac ratchet suspension are the industry leader. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. OSHA approved. Must be ordered in even cases of 20 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E & G. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in the USA.
MSA-4R
NOT CURRENTLY AVAILABLE---See P-SLSR for a very similar hard hat.......................Fibre-Metal OSHA approved cap-style hard hat with an 8-point ratchet suspension. Must be ordered in even cases of 20 hats. OSHA-approved hard hat meets or exceeds the requirements for a Type 1 helmet (Top impact) as required by ANSI Z89.1-2009, Class C, G & E. Fits head size 6 1/2 to 8.
FM-1 Hard Hat
The Bullard B-51P is a cap-style hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-51P is a Type 1 hard hat with adjustable 4-point standard suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C-51P C-51 P C51P C51 P
B-51P Hard Hat
This hat is an OSHA approved full brim hard hat made in USA. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for any job site. This full brim hard hat has a 4 point ratchet suspension with sweatband. Meets or exceeds ANSI Z89.1 current year standard, Classes C, G & E for a Type 1 hat. Fits head sizes 6 1/2 to 8. We imprint directly on the hat, no labels or decals. Made in the USA.
HH-1-4AFR
The Bullard B-71R is a full-brim hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. This is a Type 1 hard hat with adjustable 4-point ratchet suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C-71R C-71 R C71R C71 R
B-71R hard hat
The Bullard B-61R is a cap-style hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-61R is a Type 1 hard hat with adjustable 4-point ratchet suspension, and meets or exceeds ANSI Z89.1 current year standards, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1. Made in the USA.
B-61R hard hat
A Class 3 rated blaze orange safety vest. . Front zipper closure with ventilated fabric. Sizes medium to 6X.
V-C3
The HH-1-4AV OSHA approved Cap-style Hard Hat with vents. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. The vents keep the wearer's head as much as 10 degrees cooler. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as required by ANSI Z89.1-2003 Class C. Fits head sizes 6 1/2 to 8. Ink prints directly on the hat, no labels or decals. Made in the USA.
HH-1-4AV hat
Pyramex Ridgeline cap-style hard hat with Graphite finish. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. OSHA approved. Must be ordered in even cases of 16 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E & G. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in the Taiwan.
P-RGR
The Bullard B-51R is a cap-style hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-51R is a Type 1 hard hat with adjustable 4-point ratchet suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C-51R C-51 R C51R C51 R
B-51R Hard Hat
BLANK PONCHOS-SHIPPED QUICK!. Adult size, one-size-fits-most.
Single-use ponchos are being used as emergency medical coverings and the price has jumped temporarily (we hope).
This product must be ordered in even cases of 200 ponchos.
PON-1
OSHA approved cap-style hard hat with an 8-point ratchet suspension. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Must be ordered in even cases of 16 hats. OSHA-approved hard hat meets or exceeds the requirements for a Type 1 helmet (Top impact) as required by ANSI Z89.1-2009, Class C, G & E. Fits head size 6 1/2 to 8. Very similar to the Fibre-Metal FM-1 E1RW01A000.
P-SLSR
True OSHA approved hard hat made in USA. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, ground-breaking and more. This hard hat has a 4 point standard suspension with sweatband. Meets or exceeds ANSI Z89.1 current year standard, Classes E, G and C for a Type 1 hat. Fits head sizes 6 1/2 to 8. We imprint directly on the hat, no labels or decals. Made in the USA.
HH-1-4A
The OSHA approved Bullard B-34P is a Large full brim hard hat that fits head sizes up to 8 3/4. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-34P is a Type 1 hard hat with adjustable 6-point standard suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C34P C34 C-34P C-34 P
B-34P Hard Hat
MSA Matte V-Gard® Hard Hats with FasTrac ratchet suspension are the industry leader. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. OSHA approved. Must be ordered in even cases of 20 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E & G. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in the USA.
MSA-4RM
MSA-4FRV V-Gard® Vented Full Brim Hard Hats with FasTrac ratchet suspension are the industry leader. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. OSHA approved. Must be ordered in even cases of 20 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class C. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-ratchet. Ink prints directly on the hat, no labels or decals. Made in the USA.
MSA 4FRV
A Class 2 rated blaze orange safety vest. . Front zipper closure with ventilated fabric. Sizes medium to 4X.
V-C2Q
Pyramex Ridgeline full-brim hard hat with Graphite finish. OSHA approved. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Must be ordered in even cases of 12 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E & G. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in the Taiwan and printed in the USA.
P-RGRF
Information, data and/or screens (the "Material") from this site may not be copied, duplicated, saved, archived or captured by any means except that the Material may be used as part of normal browser caching and printing performed in the course of using the site for its intended purpose.