The Bullard B-71R is a full-brim hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. This is a Type 1 hard hat with adjustable 4-point ratchet suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C-71R C-71 R C71R C71 R

Pyramex Ridgeline full-brim hard hat with Graphite finish. OSHA approved. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Must be ordered in even cases of 12 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E & G. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in the Taiwan and printed in the USA. Optional chinstrap available: P-CS.

The OSHA-approved Bullard B-34R is a Large hard hat fitting head sizes up to 8 3/4. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-34R is a Type 1 hard hat with adjustable 6-point ratchet suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C-34R C-34 R C34R C34 R

Pyramex Ridgeline cap-style hard hat with Graphite finish. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. OSHA approved. Must be ordered in even cases of 16 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E & G. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in the Taiwan and printed in the USA. Optional chinstrap available: P-CS.

The Bullard B-30R is a cap-style hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The B-30R is a Type 1 hard hat with adjustable 6-point ratchet suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. New! C30R C-30R C-30 C-30 R

Pyramex Ridgeline Euro-Style hard hat with ratchet suspension and chinstrap. OSHA approved. CAN BE PRINTED IN UP TO 4 COLORS WITH ADDITIONAL CHARGES. Must be ordered in even cases of 12 hats with 36 the absolute minimum. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E, G.& C Fits size 6 1/2 to 8. (Meets or exceeds the requirements for EN 12492 for Shock Absorption (Clause 4.2.1.1- Vertical; 4.2.1.2-Front; 4.2.1.3-Side; 4.2.1.4-Rear) and Penetration (Clause 4.2.2). Shell-ABS. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in China and printed in the USA. Optional chinstrap available: P-CS.

A Class 3 rated blaze orange safety vest. . Front zipper closure with ventilated fabric. Sizes medium to 6X.

The Bullard B-51R is a cap-style hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-51R is a Type 1 hard hat with adjustable 4-point ratchet suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C-51R C-51 R C51R C51 R

The Bullard B-33R is a full-brim hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-33R is a Type 1 hard hat with adjustable 6-point ratchet suspension, and meets or exceeds ANSI Z89.1-2010, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1, Class E & G. Made in the USA. C-33R C-33 R C33R C33 R

A Class 3 rated safety green safety vest. . Front zipper closure with ventilated fabric. Sizes medium to 6X.

NOT CURRENTLY AVAILABLE---See P-SLSR for a very similar hard hat.......................Fibre-Metal OSHA approved cap-style hard hat with an 8-point ratchet suspension. Must be ordered in even cases of 20 hats. OSHA-approved hard hat meets or exceeds the requirements for a Type 1 helmet (Top impact) as required by ANSI Z89.1-2009, Class C, G & E. Fits head size 6 1/2 to 8.

OSHA approved full brim-style hard hat with an 8-point ratchet suspension. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Must be ordered in even cases of 12 hats. OSHA-approved hard hat meets or exceeds the requirements for a Type 1 helmet (Top impact) as required by ANSI Z89.1-2009, Class C, G & E. Fits head size 6 1/2 to 8. Very similar to the Fibre-Metal FM-2 E2RW01A000. Optional chinstrap available: P-CS.

The Bullard B-61R is a cap-style hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, groundbreaking, and just about anywhere a hard hat is needed. The Model #B-61R is a Type 1 hard hat with adjustable 4-point ratchet suspension, and meets or exceeds ANSI Z89.1 current year standards, Class E, G and C. It also meets or exceeds CSA Z94.1-2005, Type 1. Made in the USA.

A Class 2 rated blaze orange safety vest. . Front zipper closure with ventilated fabric. Sizes medium to 4X.

OSHA approved cap-style hard hat with an 8-point ratchet suspension. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Must be ordered in even cases of 16 hats. OSHA-approved hard hat meets or exceeds the requirements for a Type 1 helmet (Top impact) as required by ANSI Z89.1-2009, Class C, G & E. Fits head size 6 1/2 to 8. Very similar to the Fibre-Metal FM-1 E1RW01A000. Optional chinstrap available: P-CS.

The Bullard B-T2 is a cap-style, Type 2 hard hat with OSHA approval. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. The B-T2 protects against side impacts as well as top impacts and is perfect for any jobsite where extra protection is needed. The Model #B-T2 is a Type 2 hard hat with adjustable 4-point ratchet suspension, and meets or exceeds ANSI Z89.1 current year standards, Class E, G and C. Made in the USA.

4-point chinstrap for most MSA hats. Must be ordered in even cases of 10.

MSA V-Gard® Hard Hats with FasTrac ratchet suspension are the industry leader. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. OSHA approved. Must be ordered in even cases of 20 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E & G. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in the USA. Optional chinstraps MSA-C2 and MSA-C4.

True OSHA approved hard hat. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. Perfect for the job site, ground-breaking and more. This hard hat has a 6 point standard suspension with sweatband. This model meets or exceeds ANSI Z89.1-2009, Class E, G and C for a Type 1 hat. Fits head sizes 6 1/2 to 8. Made in the USA.

MSA Matte V-Gard® Hard Hats with FasTrac ratchet suspension are the industry leader. CAN BE PRINTED IN UP TO 4 COLORS ON ALL FOUR SIDES WITH ADDITIONAL CHARGES. OSHA approved. Must be ordered in even cases of 20 hats. Meets or exceeds the requirements for a Type 1 helmet (Top impact) as outlined in ANSI Z89.1 Class E & G. Fits size 6 1/2 to 8. (Not designed to protect against lateral blows from the front, sides or rear.) Shell-high-density polyethylene. Suspension-various. Ink prints directly on the hat, no labels or decals. Made in the USA. Optional chinstraps MSA-C2 and MSA-C4.